Promo video for the AUT UAV team

This promotional video highlights our spatial ecologist - Dr Barbara Bollard Breen - and our partnership with Skycam UAV.  It demonstrates a launch sequence and flight with the Swampfox UAV developed by Skycam.  It was filmed as a part of a video to showcase the research we are doing at AUT through the Institute for Applied Ecology New Zealand.  Have a look at the website to see the full video http://www.aenz.aut.ac.nz/

First research paper published!

The AUT UAV team has just had its first research paper published in an international peer reviewed journal!

Application of an unmanned aerial vehicle in spatial mapping of terrestrial biology and human disturbance in the McMurdo Dry Valleys, East Antarctica.

 Barbara Bollard-Breen •  John D. Brooks •  Matthew R. L. Jones • John Robertson •  Sonja Betschart •  Olivier Kung •  S. Craig Cary • Charles K. Lee •  Stephen B. Pointing
Polar Biology DOI 10.1007/s00300-014-1586-7 Published on-line October 2014

Our thanks to Stephen for championing this paper

The paper describes our approach and provides analysis of the images collected in the January 2014 K020 expedition.   The mapping also clearly identified the footprint of campsites and walking trails on soils, and highlighted the potential of this technique in monitoring human impact in this fragile ecosystem.

The paper is also an example of the interdisciplinary and inter organisational nature of Antarctic research.

The AUT UAV mission in Antarctica features in New Zealand CAA Vector magazine

Professor John wrote an article for the New Zealand CAA magazine Vector.  The article concentrated on the operational aspects of flying the Fox in the Taylor Dry Valley, specifically the safety procedures adopted to ensure that the UAV did not conflict with helicopter traffic in the valley.

Helicopters are the only effective way of moving people and equipment in and out of the valley, so there may be several flights a day.  In order to operate the UAV safely, a procedure was worked out with Mac Centre and the Remote Operations Facility in Charleston, South Carolina.  The operational procedures are described in the article, which also includes a couple of photographs.

We now have a tested and reliable procedure for operating UAVs in Antarctica and hope that this sets the standard for future deployments.

See:  http://www.caa.govt.nz/safety_info/vector.htm  and download the July/August 2014 issue.


Image from NZCAA Vector magazine.

Advanced training

This week, Prof. John spent two days with Skycam UAV in Danger Area 522 doing some advanced training with the Fox UAV.

Drawing on its military origins, the Fox can act as an aerial relay station for communication between two ground control stations.  By the same token, the aircraft can be controlled from either GCS, while the non-controlling unit can monitor the flight.

On the first day, the Fox, now fitted with larger capacity batteries was launched and flown locally from our regular airfield on a farm in D522.  Text communication between two GCS units was tested and control was handed back and forth before the aircraft was landed.  When we took off, the Fox measured the wind speed at between 25 and 30 kph, but by the end of the flight, it was gusting 50kph.  The Fox was able to deal with this, but the conditions would not be suitable for collecting good images.  Lew Woods of Skycam decided to land the Fox in Partial Control mode - the operator has control over heading and throttle setting, while the autopilot assists by stabilising the aircraft.

On the second day, the conditions were much more gentle and Dr. Tim and Prof. John launched the Fox from our regular airfield  in D522, while the away team of Rene and Lew headed to Lew's farm on the edge of D522.  The Fox flew around the airfield conducting a photo survey before we commanded a new waypoint overhead Lew's farm.  The away team were informed that the Fox was en route and they monitored the progress of the flight on their own GCS.  As the Fox flew over the waypoint, we put our GCS into 'Listen' mode and the away team captured the aircraft and took control for the landing.

After a battery change, the Fox was relaunched, conducted a photo reconnaisance of Lew's farm and then sent back to our location.  The procedure was reversed and we took control of the Fox about 1000m out from the target, bringing the aircraft down for a conventional parachute recovery.

The exercise was a total success, with one or two lessons learned about the actual handover process and message relay.  A nice little surprise awaited us as we recovered the Fox and opened the hatch to turn the systems off.  Nestling inside the fuselage was a note with a message "Greetings from the A-team".  Perhaps a rather expensive way of delivering a smiley face, but a nice touch!


The Fox is watching Grass Grubs

The wonderful people at Skycam UAV who build and supply our UAVs have been surveying a local farm.

Grass Grubs are the larvae of the bronze beetle Eucolaspsis brunnea, and eat the roots of pasture grasses, causing significant damage and thus loss of productivity on New Zealand farms.  Since the damage can be seen by the naked eye, it was suggested that the Fox UAV could be used to assess the extent of infestation of the farm and thus help in planning eradication measures.

The Skycam team visited the farm and flew their Fox over the affected areas and collected a large number of photographs.  Coincidentally, Skycam UAV was approached by Simactive, a company providing photogrammetry software, offering to process a set of images as a demonstration of their product's capability.

Skycam sent a sub-set of the images (50) to Simactive, who processed them into an orthomosaic.  The result is shown below




Even to the untrained eye, it is obvious that the grass is severely damaged in this paddock and would provide little feed for sheep or cattle set to graze on it.

Since the images are georeferenced, the farmer can use the mosaic to plan treatment of the affected areas, though it is apparently difficult to treat established pasture 

(see http://www.pggwrightsonseeds.com/uploads/Forage%20Focus%20No%2014%20Grass%20Grub.pdf)

This is another example of the non-military use of UAVs and the way our research may benefit New Zealand.
Thanks to Skycam UAV for providing the images and to Simactive for producing the orthomosaic.


Getting down to business in Taylor Valley

It's a while since I wrote my last blog about the deployment to Antarctica.  This is the result of having too much to do when I returned to New Zealand.  Sorry!

Having shown that the Fox would fly satisfactorily in the Antarctic conditions, though admittedly they were summer conditions, I had to start collecting data and stretching my comfort zone - flying over the camp and Spaulding Pond was an important first step, but there is very much more to do in Taylor Valley.

After the spectacular start to our flights, we had a couple of setbacks.  I found that one or other of the cameras was not triggering, but testing on the ground suggested that both cameras were working fine.  A morning of testing at K020 Base Camp suggested that one of the trigger leads from the autopilot had a fault, possibly in one of the plugs.  This was not something I could fix, so I decided to use the remaining camera lead and select the camera for the particular flight.

The next problem occurred on the first flight of the day.  After all pre-takeoff checks were complete, I hooked on the catapult and walked back the normal 20 paces.  I asked my wingman, Scotty, to command takeoff on the GCS and released the Fox, which accelerated away, but skimmed close to the ground, catching the propeller and smashing it into many pieces.  We aborted the takeoff at the GCS to prevent damage to the electronics and turn off the motor.  Because we must remove all foreign material from the valley, we spent about half an hour looking for the bits.  They had spread an amazing distance from the crash site.

Fortunately, I had several sets of propeller blades in my kit and it took only half an hour or so to mount new ones, check for proper alignment and prepare another flight.  But why had the aircraft failed to take off?  Probably two factors: just as we released the Fox, the wind died away, leaving us with no airflow over the wings at the critical moment; and the bungee was left out overnight, so perhaps the rubber had lost some of its elasticity (I know my knee joints did in the cold conditions!)  The next flight, I checked the wind carefully and took an extra five steps back.  The aircraft accelerated rapidly and completed a perfect launch.

We flew to Canada glacier across the Taylor Valley to the Northern side.  The tip of the glacier is approximately 5km from Spaulding Pond, so this was a challenge to the system, but more so to my confidence - as the aircraft flew off across the valley with what appeared to be a sense of urgency, we kept it in sight as the GCS reported "Range one thousand... range two thousand... etc".  At three thousand metres even those with the keenest eyes lost sight of the Fox against the backdrop of the mountains on the other side of the valley.  However, the GCS display showed the Fox heading for its waypoint at the tip of the glacier.  We had the RGB camera running during the crossing.

We did a couple of orbits over the end of the glacier and then programmed a return via Crescent glacier just to the East of Spaulding Pond.  As always, there was intense competition from the ground crew to be the first to spot the aircraft.  I heard it long before I had "eyes on" at about 1000 metres.  From there, I recalled the Fox for an uneventful automated parachute landing.  Plenty to think about during the night.



"Taylor Valley traffic, Fox UAV is airborne"



First Days in Taylor Dry Valley

As promised, here is the first of my reports on our deployment to Taylor Valley, Antarctica.


We flew into the Taylor Dry Valley from Scott Base in ZK-IDE, an Aerospatiale AS-350B3 Squirrel supplied by Southern Lakes Helicopters.  The flight across the ice sheet was in bright sunshine, but as we neared our destination, we ran into very low cloud.  It's an "interesting" experience for a fixed wing pilot to be flying at 20kt only 200 feet AGL, but our pilot Heff was comfortable with the visibility and we eventually ran out of the poor conditions into bright sunshine in the valley.

The basis of the camp, a blue Polar Haven tent, had been set up by the engineers a few days earlier.  There was diesel fuel for the heater and a generator.  There were only two of us on the first flight and our job was to move tents and other stores from the landing area and set up an essential facility (the Poo Tent, which will not be mentioned again).

Our equipment arrived in a sling load two days later - two UAVs and two GCSs.  I felt that things were at last moving!  I checked over the equipment and found that all had arrived safely.


The first major task for the UAV deployment was to find a suitable area from which to operate.  My preconceptions were proved to be completely wrong.  I had expected to be flying from a snowfield, rather like the area where we had our Antarctic Skills Training, but the Taylor Dry Valley is ... dry!  I should have realised this!  The ground is made up of rocks and gravel and very fine dust, broken into polygons by the effects of repeated freezing and thawing.  This will be apparent in some of the photographs that will appear on this site.  To be frank, I was rather shocked - the valley looked very inhospitable for UAV operations.

We identified a flat area with relatively few large rocks some 500m from the Base Camp.  Though the valley is essentially dry, there are streams of melt water flowing from the glaciers.  Fortunately, we found an area large enough to operate from, bounded by shallow streams.

Because our activities were to be coordinated with the WorldView 2 satellite operations, we set up four tarpaulins, 4m square, and coloured red, blue, green and yellow.  I didn't realise until I saw aerial images, that our "Fox Field" looked rather like the logo of a very popular computer operating system.


In the next post, I'll describe the first flight of the Fox.

Successful Antarctic Expedition

We are now back at Scott Base, staging for our return to New Zealand tomorrow.

Our expedition to the Taylor Dry Valley was an outstanding success and over the next few weeks, I'll publish photographs and comments on the deployment of the Swampfox UAV, built and supplied by Skycam UAV in Palmerston North.  I want to thank the company specifically, because they supplied spare parts and advice for our operations.  Without their support, we would not have been able to complete our programme of research.

This has been an awesome experience and I hope that in future years, we will be able to conduct further flights in Antarctica.

Clearance to Fly and Ground Testing

This morning we drove over to McMurdo base to discuss our UAV operations with Air Traffic Controllers and Helicopter Operations Manager.

We set out our proposed operations in the Taylor Dry Valley and discussed the way in which we could ensure the safety of all airspace users, i.e. helicopters.  Essentially, we will notify Mac Centre of our intentions to fly 24 hours prior to commencement and a NOTAM will be issued.  We will then use our SOPs and make voice advisory 30 minutes prior to launch and immediately before launch.  At completion of the flight, a further voice advisory will be made and when operations cease for the day, a final call will be made.

The whole purpose is to deconflict our operations and that of other air traffic.  To this end, some flights will be conducted after normal helicopter operations have ceased - there is no problem of twilight or darkness here!  However, we are coordinating our work with other researchers using the WorldView 2 satellite, so we will need to synchronise our flights with the passes of the satellite.

This afternoon, I assembled the Fox and GCS and went through the pre-flight checklist to ensure that the systems are working.  All appears to be in order, so the Pelican cases have been weighed and are ready to be transported to the Taylor Valley on Thursday if the weather permits.

We will be out of Internet coverage for the next two weeks or so; there will be no further posts until our return to Scott Base.

To give readers a flavour of our location, here is a picture taken at the Scott Base sign and one at the flagpole in front of the Base.


The adventure begins - arrival at Scott Base

I am very excited.  After a frustrating day, when the flight to Antarctica was first postponed and then cancelled due to weather en route, we arrived at McMurdo around 17.30 just one day late.  All the equipment had been dispatched two weeks earlier.

After the arrival briefing and a meal, we went down to the equipment cages and I was very pleased to see five Pelican cases with my name and that of AUT on them.  Tomorrow, after a survival course, I'll open the cases and test all the equipment.  There are two UAVs, two GCSs and a spectroradiometer.  We expect to deploy to the Taylor Valley mid week and hope to conduct some flights towards the end of the week.

There is a pleasant bar here at Scott Base and it is obviously an important place for information exchange.  I met a helicopter pilot and an air traffic controller, who provided useful information on flight clearances.  It appears that obtaining clearance to fly the UAVs in the Dry Valleys will not be a problem, provided that sufficient notice is given to all pilots and that the specific location for the operation is notified.

This place has an amazing ambience - the sense of history is tangible.  I'm sitting typing this short post in a computer room where there are scientific experiments running that were started in 1957 (the Ionospheric Vertical Sounding Programme).

Working here is going to take some getting used to - I am typing this post at 23.40 and the sun is shining brightly.  The temperature is a balmy 1C and the wind around 2 knots; ideal conditions for UAV flight.  Let's hope that the conditions in the Taylor Valley are just as nice.

Equipment going South

A computer glitch has meant that Prof. John B. has been locked out of this blog for the last fortnight.  After many frustrating attempts, access has been restored.

This comes just in time: the Hawk and GCS have both been sent to the Antarctica New Zealand base in Christchurch for transport down to the ice.  Our new Fox UAV and a spare GCS have also been sent to Christchurch.

Skycam UAV have been very generous sponsors of our research, loaning us spare wings, repair items, replacement spars, batteries and motor, together with a complete GCS, so that should we have problems down there, we can continue to collect data.

Prof. John B will travel to the ice to take part in the K020 deployment as part of the New Zealand Terrestrial Antarctic Biodiversity Survey, using the UAVs to collect data on cyanobacterial mats in the Taylor dry valley.  This is a proof-of-concept project.  Using the vegetation stress camera and the two Sony NEX5-N cameras, the UAVs will survey the lake margins.  This is all new to John; he is a microbiologist, but has never worked on cyanobacteria, nor has he been to Antarctica before, so the 3 to 4 week deployment will be a steep learning curve.  This has been complicated by the unfortunate accident in which the AUT project leader broke his ankle, which ruled him out of travel to Antarctica this year.  However, if all goes well, the UAVs may be depolyed in future expeditions.

Since leaving Auckland, John has spent two days with Dr. Tim Brooks of Skycam UAV, training on the Fox.  The Fox is rather different from the Hawk, being a tailless aircraft, and is considerably easier to operate.  A different pre-flight checklist is used, but the GCS software is exactly the same, so type conversion is very straightforward.  As usual when John goes to the Manawatu, the weather conditions were not very conducive to UAV operation, but Tim and John achieved six training flights, collecting a large number of nIR and RGB images of part of the D522 area in Pahiatua.  The next flights will be down on the ice.  At least there are no trees there!

John hopes to keep colleagues and other interested UAV operators informed of the progress of the project via this website.

Acceptance flights of new UAV - Swampfox

Prof. John B went to Palmerston North last week to conduct acceptance flights of AUT's new Swampfox UAV.

The Fox is totally New Zealand designed and built - the airframe was designed by Skycam UAV Ltd. in conjunction with the University of Queensland, the autopilot was designed by the New Zealand Defence Technology Agency, and the whole aircraft and systems were constructed Skycam UAV.  The Fox is a flying wing configuration, rather than a conventional wings plus tailplane combination.

Dr. Tim Brooks with the Swampfox

As usual for this time of year, the Manawatu weather was unreliable and rain was forecast for the whole week.  However, carpe diem!  Monday dawned cloudy and a bit windy, but Prof. John B and Dr. Tim Brooks of Skycam packed the control vehicle and headed out to Mangahao in the Wairarapa to fly in Danger Area 522, which allows Beyond Visible Line of Sight (BVLS) flights up to 2500ft AMSL (approximately 2000ft AGL).

After assembly, which is very straightforward, Tim demonstrated the launch procedure.  The Fox can be operated from the same GCS as our Hawk, but the launch handling is a little different.  After pre take-off checks are complete, the Fox is attached to the bungee catapult and the Operator enters the Take-off command into the GCS computer.  In contrast to the Hawk, the motor does not immediately start, which is initially a bit disconcerting.  This is actually a good thing, because the Handler holds the Fox by the trailing edges, which places a very large propeller right between the wrists!  When the aircraft is released, the accelerometers in the autopilot sense the launch and the motor is turned on.  Rate of climb is around 700fpm.  Prof. John B did the second launch; the aircraft is 'bounced' on the catapult and released at the top of the bounce, so that the Fox is pointing about 15 degrees above horizontal. 

We had fitted two Sony NEX5-N cameras into the sensor cassette and during the two flights totalling about 50 minutes, we took around 3200 high resolution photographs, half in RGB, the other half in nIR.  These will be processed with Pix4UAV software and will be a little bonus for the farmer - we will provide the orthomosaics to the farmer.  It appears that the areas of grass grub infestation show up very well in these images.

Recovery of the UAV was straightforward - after the Return command was entered, the Fox returned to the launch point; Landing Mode 4 entered commanded the aircraft to descend to 150ft AGL and fly upwind before releasing the parachute.  The parachute allows the UAV to land upside down, thus protecting the sensor window and the winglets.

The remainder of the week was far too windy and wet for further flights, though we did go out again on Tuesday and did some ground testing of the video downlink on the Hawk.

The next time the Fox flies, it will probably be in Antarctica - the UAS is on its way to Christchurch now for transport to the ice.